dmesg - first test
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-30-generic (buildd@lgw01-52) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.1) ) #36~14.04.1-Ubuntu SMP Fri Feb 26 18:49:23 UTC 2016 (Ubuntu 4.2.0-30.36~14.04.1-generic 4.2.8-ckt3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000392fdfff] usable
BIOS-e820: [mem 0x00000000392fe000-0x0000000039e70fff] reserved
BIOS-e820: [mem 0x0000000039e71000-0x000000003a0eefff] usable
BIOS-e820: [mem 0x000000003a0ef000-0x000000003acbefff] ACPI NVS
BIOS-e820: [mem 0x000000003acbf000-0x000000003b613fff] reserved
BIOS-e820: [mem 0x000000003b614000-0x000000003b614fff] usable
BIOS-e820: [mem 0x000000003b615000-0x000000003b69afff] reserved
BIOS-e820: [mem 0x000000003b69b000-0x000000003b8b7fff] usable
BIOS-e820: [mem 0x000000003b8b8000-0x000000003bff8fff] reserved
BIOS-e820: [mem 0x000000003bff9000-0x000000003bffffff] usable
BIOS-e820: [mem 0x000000003c000000-0x000000003dffffff] reserved
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: MSI MS-7885/X99S SLI Krait Edition (MS-7885), BIOS N.40 11/02/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000040000000 mask 3FFFC0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00003F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 base 0000F0000000 mask 3FFFFE000000 write-through
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd30-0x000fcd3f] mapped at [ffff8800000fcd30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff4000, 0x01ff4fff] PGTABLE
BRK [0x01ff5000, 0x01ff5fff] PGTABLE
BRK [0x01ff6000, 0x01ff6fff] PGTABLE
init_memory_mapping: [mem 0x4bfe00000-0x4bfffffff]
[mem 0x4bfe00000-0x4bfffffff] page 1G
init_memory_mapping: [mem 0x4a0000000-0x4bfdfffff]
[mem 0x4a0000000-0x4bfdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x392fdfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x391fffff] page 2M
[mem 0x39200000-0x392fdfff] page 4k
init_memory_mapping: [mem 0x39e71000-0x3a0eefff]
[mem 0x39e71000-0x3a0eefff] page 4k
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0x3b614000-0x3b614fff]
[mem 0x3b614000-0x3b614fff] page 4k
BRK [0x01ff9000, 0x01ff9fff] PGTABLE
init_memory_mapping: [mem 0x3b69b000-0x3b8b7fff]
[mem 0x3b69b000-0x3b8b7fff] page 4k
init_memory_mapping: [mem 0x3bff9000-0x3bffffff]
[mem 0x3bff9000-0x3bffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x49fffffff]
[mem 0x100000000-0x49fffffff] page 1G
RAMDISK: [mem 0x359fc000-0x36cf5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A4FB098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A528FB0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A4FB1D8 02DDD2 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000003ACBDF80 000040
ACPI: APIC 0x000000003A5290C0 000100 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A5291C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A529208 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A5292A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000003A5292E8 000495 (v01 IdeRef IdeTable 00001000 INTL 20120913)
ACPI: UEFI 0x000000003A529780 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x000000003A5297C8 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000003A5297F8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000003A529830 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x000000003A5298C0 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x000000003A529928 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000003A529958 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000003A52A7B0 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000003A52A7F0 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: DMAR 0x000000003A537E38 0000F4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000003A537F30 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bfff7000-0x4bfffbfff]
[ffffea0000000000-ffffea0012ffffff] PMD -> [ffff8804af600000-ffff8804bf5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000392fdfff]
node 0: [mem 0x0000000039e71000-0x000000003a0eefff]
node 0: [mem 0x000000003b614000-0x000000003b614fff]
node 0: [mem 0x000000003b69b000-0x000000003b8b7fff]
node 0: [mem 0x000000003bff9000-0x000000003bffffff]
node 0: [mem 0x0000000100000000-0x00000004bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bfffffff]
On node 0 totalpages: 4167485
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3615 pages used for memmap
DMA32 zone: 231329 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x392fe000-0x39e70fff]
PM: Registered nosave memory: [mem 0x3a0ef000-0x3acbefff]
PM: Registered nosave memory: [mem 0x3acbf000-0x3b613fff]
PM: Registered nosave memory: [mem 0x3b615000-0x3b69afff]
PM: Registered nosave memory: [mem 0x3b8b8000-0x3bff8fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3dffffff]
PM: Registered nosave memory: [mem 0x3e000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8804af200000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4102345
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16304000K/16669940K available (7940K kernel code, 1247K rwdata, 3816K rodata, 1468K init, 1292K bss, 365940K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=12
NR_IRQS:16640 nr_irqs:928 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
vt handoff: transparent VT on vt#7
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3300.294 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6600.58 BogoMIPS (lpj=13201176)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea8000 - ffffffff81eaf000)
ftrace: allocating 30986 entries in 122 pages
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000003b4c7000 end: 0x0000003b4d6fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz (fam: 06, model: 3f, stepping: 02)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 120780540212774 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (79207.05 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3a0ef000-0x3acbefff] (12386304 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 5:32:22, date: 03/05/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff window]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:2f03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:2f06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb11c000-0xfb11cfff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:11.4: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:11.4: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:11.4: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:11.4: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb11b000-0xfb11b7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb100000-0xfb10ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb11a000-0xfb11a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb117000-0xfb1173ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb110000-0xfb113fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb116000-0xfb1163ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb115000-0xfb1150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [14e4:43a0] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xfb200000-0xfb3fffff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.2: PCI bridge to [bus 04]
pci 0000:05:00.0: [10de:17c8] type 00 class 0x030000
pci 0000:05:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:05:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:05:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:05:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:05:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:05:00.1: [10de:0fb0] type 00 class 0x040300
pci 0000:05:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:1533] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xfb700000-0xfb7fffff]
pci 0000:07:00.0: reg 0x18: [io 0xd000-0xd01f]
pci 0000:07:00.0: reg 0x1c: [mem 0xfb800000-0xfb803fff]
pci 0000:07:00.0: reg 0x30: [mem 0xfb600000-0xfb6fffff pref]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb8fffff]
pci 0000:08:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfba00000-0xfba00fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:09:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:09:00.0: reg 0x10: [mem 0xfb900000-0xfb907fff 64bit]
pci 0000:09:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:05:00.0
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:05:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x392fe000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a0ef000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b615000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b8b8000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [mem 0xfb200000-0xfb4fffff]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.2: PCI bridge to [bus 04]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfb600000-0xfb8fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:02: resource 1 [mem 0xfb200000-0xfb4fffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:05: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfb600000-0xfb8fffff]
pci_bus 0000:08: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:05:00.0: Video device with shadowed ROM
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19432K (ffff8800359fc000 - ffff880036cf6000)
DMAR: [Firmware Bug]: RMRR entry for device 08:00.0 is broken - applying workaround
DMAR: [Firmware Bug]: RMRR entry for device 09:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x319fc000-0x359fc000] (64MB) mapped at [ffff8800319fc000-ffff8800359fbfff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f926234d1c, max_idle_ns: 440795328518 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
microcode: CPU0 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU1 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU2 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU3 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU4 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU5 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU6 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU7 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU8 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU9 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU10 sig=0x306f2, pf=0x4, revision=0x2d
microcode: CPU11 sig=0x306f2, pf=0x4, revision=0x2d
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457155939.448:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:01.1:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:02.2:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb3: SerialNumber: 0000:08:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:09:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb5: SerialNumber: 0000:09:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:09:00.0: xHCI Host Controller
xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.2.0-30-generic xhci-hcd
usb usb6: SerialNumber: 0000:09:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb117000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.2.0-30-generic ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb116000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 4.2.0-30-generic ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6c368abf943cd41683eb2a5199bfb9b401ed5ab5'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:361:516
hash matches /build/linux-lts-wily-8ENwT0/linux-lts-wily-4.2.0/drivers/base/power/main.c:816
acpi device:110: hash matches
rtc_cmos 00:01: setting system clock to 2016-03-05 05:32:22 UTC (1457155942)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1468K (ffffffff81d39000 - ffffffff81ea8000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 240K (ffff8800017c4000 - ffff880001800000)
Freeing unused kernel memory: 280K (ffff880001bba000 - ffff880001c00000)
systemd-udevd[180]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:11.4: version 3.0
PTP clock support registered
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xe impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
igb: Copyright (c) 2007-2014 Intel Corporation.
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xfb11b000 port 0xfb11b180 irq 45
ata3: SATA max UDMA/133 abar m2048@0xfb11b000 port 0xfb11b200 irq 45
ata4: SATA max UDMA/133 abar m2048@0xfb11b000 port 0xfb11b280 irq 45
pps pps0: new PPS source ptp0
igb 0000:07:00.0: added PHC on eth0
igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) d8:cb:8a:38:4d:01
igb 0000:07:00.0: eth0: PBA No: 000300-000
igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-10: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 7-1: new high-speed USB device number 2 using ehci-pci
usb 8-1: new high-speed USB device number 2 using ehci-pci
usb 1-10: New USB device found, idVendor=1a40, idProduct=0101
usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-10: Product: USB 2.0 Hub
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
usb 3-1: New USB device found, idVendor=2109, idProduct=3431
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: READ LOG DMA EXT failed, trying unqueued
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
ata4.00: ATA-8: WDC WD7500BPKX-22HPJT0, 01.01A01, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
scsi 3:0:0:0: Direct-Access ATA WDC WD7500BPKX-2 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 3:0:0:0: [sdc] 4096-byte physical blocks
sd 3:0:0:0: Attached scsi generic sg2 type 0
ata3.00: Enabling discard_zeroes_data
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
usb 7-1: New USB device found, idVendor=8087, idProduct=800a
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 6 ports detected
usb 8-1: New USB device found, idVendor=8087, idProduct=8002
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 48 bits of entropy available
init: plymouth-upstart-bridge main process (269) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (279) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (282) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 1-10.1: new high-speed USB device number 3 using xhci_hcd
usb 1-10.1: New USB device found, idVendor=03f0, idProduct=7112
usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10.1: Product: HP Officejet Pro 8610
usb 1-10.1: Manufacturer: HP
usb 1-10.1: SerialNumber: CN55AFW156
usb 1-10.2: new high-speed USB device number 4 using xhci_hcd
usb 1-10.2: New USB device found, idVendor=0451, idProduct=8044
usb 1-10.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10.2: SerialNumber: A4022879D913
hub 1-10.2:1.0: USB hub found
hub 1-10.2:1.0: 4 ports detected
usb 1-10.3: new low-speed USB device number 5 using xhci_hcd
usb 1-10.3: New USB device found, idVendor=2516, idProduct=001a
usb 1-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.3: Product: Keyboard -- QuickFire XT
usb 1-10.3: Manufacturer: CM Storm
usb 1-10.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-10.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-10.4: new full-speed USB device number 6 using xhci_hcd
usb 1-10.4: New USB device found, idVendor=046d, idProduct=c537
usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.4: Product: USB Receiver
usb 1-10.4: Manufacturer: Logitech
random: nonblocking pool is initialized
Adding 16668668k swap on /dev/sdb5. Priority:-1 extents:1 across:16668668k SSFS
systemd-udevd[402]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
[drm] Initialized drm 1.1.0 20060810
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
hidraw: raw HID events driver (C) Jiri Kosina
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
intel_rapl: Found RAPL domain package
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
audit: type=1400 audit(1457155944.326:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1457155944.326:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1457155944.326:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1457155944.326:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1457155944.326:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
audit: type=1400 audit(1457155944.326:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=570 comm="apparmor_parser"
WARNING! power/level is deprecated; use power/control instead
[PCSPP,TRISTATE,EPP]
parport0: irq 0 detected
lp0: using parport0 (polling).
wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7112
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:2516:001A.0001/input/input5
usblp 1-10.1:1.3: usblp1: USB Bidirectional printer dev 3 if 3 alt 0 proto 2 vid 0x03F0 pid 0x7112
usbcore: registered new interface driver usblp
usb-storage 1-10.1:1.2: USB Mass Storage device detected
MXM: GUID detected in BIOS
nouveau ![ DEVICE][0000:05:00.0] unknown Maxwell chipset
nouveau E[ DEVICE][0000:05:00.0] unknown chipset, 0x120080a1
nouveau E[ DRM] failed to create 0x00000080, -22
scsi host4: usb-storage 1-10.1:1.2
usbcore: registered new interface driver usb-storage
nouveau: probe of 0000:05:00.0 failed with error -22
usbcore: registered new interface driver uas
vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:05:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 361.28 Wed Feb 3 15:48:04 PST 2016
hid-generic 0003:2516:001A.0001: input,hidraw0: USB HID v1.10 Keyboard [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input0
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:2516:001A.0002/input/input6
hid-generic 0003:2516:001A.0002: input,hidraw1: USB HID v1.10 Device [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input1
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/0003:046D:C537.0003/input/input7
hid-generic 0003:046D:C537.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C537.0004/input/input8
hid-generic 0003:046D:C537.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input1
scsi 4:0:0:0: Direct-Access HP HP Officejet Pro 1.00 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdd] Attached SCSI removable disk
snd_hda_intel 0000:05:00.1: Disabling MSI
snd_hda_intel 0000:05:00.1: Handle VGA-switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
init: failsafe main process (791) killed by TERM signal
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1457155945.706:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=944 comm="apparmor_parser"
audit: type=1400 audit(1457155945.706:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=944 comm="apparmor_parser"
audit: type=1400 audit(1457155945.706:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=944 comm="apparmor_parser"
init: cups main process (951) killed by HUP signal
init: cups main process ended, respawning
nvidia-uvm: Loaded the UVM driver in lite mode, major device number 243
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:05:00.1/sound/card1/input19
pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 361.28 Wed Feb 3 15:15:17 PST 2016
nvidia-modeset: Allocated GPU:0 (GPU-55230eba-c337-8c1a-73dc-b9b1ba23195a) @ PCI:0000:05:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 3
init: plymouth-upstart-bridge main process ended, respawning
igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 153 callbacks suppressed
audit: type=1400 audit(1457155975.754:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2434 comm="apparmor_parser"
audit: type=1400 audit(1457155975.754:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2434 comm="apparmor_parser"
audit: type=1400 audit(1457155975.758:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2434 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
systemd-hostnamed[3128]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[3244]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-10: USB disconnect, device number 2
usb 1-10.1: USB disconnect, device number 3
usblp0: removed
usblp1: removed
usb 1-10.2: USB disconnect, device number 4
usb 1-10.3: USB disconnect, device number 5
usb 1-10.4: USB disconnect, device number 6
audit: type=1400 audit(1457185218.801:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3724 comm="apparmor_parser"
audit: type=1400 audit(1457185218.801:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3724 comm="apparmor_parser"
audit: type=1400 audit(1457185218.805:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3724 comm="apparmor_parser"
usb 1-10: new high-speed USB device number 7 using xhci_hcd
usb 1-10: New USB device found, idVendor=1a40, idProduct=0101
usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-10: Product: USB 2.0 Hub
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
usb 1-10.1: new high-speed USB device number 8 using xhci_hcd
usb 1-10.1: New USB device found, idVendor=03f0, idProduct=7112
usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10.1: Product: HP Officejet Pro 8610
usb 1-10.1: Manufacturer: HP
usb 1-10.1: SerialNumber: CN55AFW156
usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7112
usb-storage 1-10.1:1.2: USB Mass Storage device detected
scsi host5: usb-storage 1-10.1:1.2
usblp 1-10.1:1.3: usblp1: USB Bidirectional printer dev 8 if 3 alt 0 proto 2 vid 0x03F0 pid 0x7112
usb 1-10.2: new high-speed USB device number 9 using xhci_hcd
usb 1-10.2: New USB device found, idVendor=0451, idProduct=8044
usb 1-10.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10.2: SerialNumber: A4022879D913
hub 1-10.2:1.0: USB hub found
hub 1-10.2:1.0: 4 ports detected
usb 1-10.3: new low-speed USB device number 10 using xhci_hcd
usb 1-10.3: New USB device found, idVendor=2516, idProduct=001a
usb 1-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.3: Product: Keyboard -- QuickFire XT
usb 1-10.3: Manufacturer: CM Storm
usb 1-10.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-10.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:2516:001A.0005/input/input20
hid-generic 0003:2516:001A.0005: input,hidraw0: USB HID v1.10 Keyboard [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input0
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:2516:001A.0006/input/input21
hid-generic 0003:2516:001A.0006: input,hidraw1: USB HID v1.10 Device [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input1
usb 1-10.4: new full-speed USB device number 11 using xhci_hcd
usb 1-10.4: New USB device found, idVendor=046d, idProduct=c537
usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.4: Product: USB Receiver
usb 1-10.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/0003:046D:C537.0007/input/input22
hid-generic 0003:046D:C537.0007: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C537.0008/input/input23
hid-generic 0003:046D:C537.0008: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input1
scsi 5:0:0:0: Direct-Access HP HP Officejet Pro 1.00 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] Attached SCSI removable disk
usblp0: removed
usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7112
usblp1: removed
usblp 1-10.1:1.3: usblp1: USB Bidirectional printer dev 8 if 3 alt 0 proto 2 vid 0x03F0 pid 0x7112
audit: type=1400 audit(1457247816.584:68): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457247816.584:69): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457247816.584:70): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457247816.584:71): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457247816.584:72): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457247816.584:73): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:07:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
usb 1-10: USB disconnect, device number 7
usb 1-10.1: USB disconnect, device number 8
usblp0: removed
usblp1: removed
usb 1-10.2: USB disconnect, device number 9
usb 1-10.3: USB disconnect, device number 10
usb 1-10.4: USB disconnect, device number 11
traps: nvidia-settings[6270] trap int3 ip:7f1b24f30c13 sp:7ffee019b520 error:0
traps: nvidia-settings[6274] trap int3 ip:7f86562f1c13 sp:7ffcf8998720 error:0
traps: nvidia-settings[6282] trap int3 ip:7f543c68cc13 sp:7ffeb399ca90 error:0
traps: nvidia-settings[6290] trap int3 ip:7fd373ad5c13 sp:7ffccd5ab670 error:0
traps: nvidia-settings[6295] trap int3 ip:7f4606115c13 sp:7fff13d63590 error:0
traps: nvidia-settings[6298] trap int3 ip:7f4b1c0d4c13 sp:7ffd6efc2860 error:0
traps: nvidia-settings[6311] trap int3 ip:7fcc87209c13 sp:7ffe6952ff60 error:0
traps: nvidia-settings[6322] trap int3 ip:7f5a81e0cc13 sp:7ffde30c3d10 error:0
traps: nvidia-settings[6341] trap int3 ip:7fe4b7474c13 sp:7fff1e9732a0 error:0
traps: nvidia-settings[6344] trap int3 ip:7efc73ac7c13 sp:7fff00f4d820 error:0
traps: nvidia-settings[6347] trap int3 ip:7f2994ad5c13 sp:7ffc586fb520 error:0
traps: nvidia-settings[6367] trap int3 ip:7f9cd7b85c13 sp:7fff9ac91d10 error:0
traps: nvidia-settings[6370] trap int3 ip:7fc0993f6c13 sp:7ffd1cb2df70 error:0
traps: nvidia-settings[6373] trap int3 ip:7fbe0adf8c13 sp:7ffcaab49c60 error:0
traps: nvidia-settings[6376] trap int3 ip:7fe2da075c13 sp:7ffed4f74860 error:0
traps: nvidia-settings[6381] trap int3 ip:7f9442063c13 sp:7fffda333180 error:0
traps: nvidia-settings[6386] trap int3 ip:7f7fedc50c13 sp:7ffe06a17030 error:0
traps: nvidia-settings[6394] trap int3 ip:7fa90cc00c13 sp:7ffea67a50c0 error:0
traps: nvidia-settings[6397] trap int3 ip:7fb87ceccc13 sp:7ffe727143e0 error:0
usb 1-10: new high-speed USB device number 12 using xhci_hcd
usb 1-10: New USB device found, idVendor=1a40, idProduct=0101
usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-10: Product: USB 2.0 Hub
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 4 ports detected
usb 1-10.1: new high-speed USB device number 13 using xhci_hcd
usb 1-10.1: New USB device found, idVendor=03f0, idProduct=7112
usb 1-10.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10.1: Product: HP Officejet Pro 8610
usb 1-10.1: Manufacturer: HP
usb 1-10.1: SerialNumber: CN55AFW156
usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7112
usb-storage 1-10.1:1.2: USB Mass Storage device detected
scsi host6: usb-storage 1-10.1:1.2
usblp 1-10.1:1.3: usblp1: USB Bidirectional printer dev 13 if 3 alt 0 proto 2 vid 0x03F0 pid 0x7112
usb 1-10.2: new high-speed USB device number 14 using xhci_hcd
usb 1-10.2: New USB device found, idVendor=0451, idProduct=8044
usb 1-10.2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-10.2: SerialNumber: A4022879D913
hub 1-10.2:1.0: USB hub found
hub 1-10.2:1.0: 4 ports detected
usb 1-10.3: new low-speed USB device number 15 using xhci_hcd
usb 1-10.3: New USB device found, idVendor=2516, idProduct=001a
usb 1-10.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.3: Product: Keyboard -- QuickFire XT
usb 1-10.3: Manufacturer: CM Storm
usb 1-10.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-10.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.0/0003:2516:001A.0009/input/input24
hid-generic 0003:2516:001A.0009: input,hidraw0: USB HID v1.10 Keyboard [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input0
input: CM Storm Keyboard -- QuickFire XT as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.3/1-10.3:1.1/0003:2516:001A.000A/input/input25
hid-generic 0003:2516:001A.000A: input,hidraw1: USB HID v1.10 Device [CM Storm Keyboard -- QuickFire XT] on usb-0000:00:14.0-10.3/input1
usb 1-10.4: new full-speed USB device number 16 using xhci_hcd
usb 1-10.4: New USB device found, idVendor=046d, idProduct=c537
usb 1-10.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10.4: Product: USB Receiver
usb 1-10.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/0003:046D:C537.000B/input/input26
hid-generic 0003:046D:C537.000B: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.1/0003:046D:C537.000C/input/input27
hid-generic 0003:046D:C537.000C: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-10.4/input1
scsi 6:0:0:0: Direct-Access HP HP Officejet Pro 1.00 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] Attached SCSI removable disk
usblp0: removed
usblp 1-10.1:1.1: usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7112
usblp1: removed
usblp 1-10.1:1.3: usblp1: USB Bidirectional printer dev 13 if 3 alt 0 proto 2 vid 0x03F0 pid 0x7112
audit: type=1400 audit(1457248438.084:74): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=6623 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248438.084:75): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=6623 comm="cups-deviced" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248438.084:76): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248438.084:77): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:78): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:79): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:80): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:81): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:82): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
audit: type=1400 audit(1457248439.060:83): apparmor="DENIED" operation="signal" profile="/usr/sbin/cupsd" pid=3725 comm="cupsd" requested_mask="send" denied_mask="send" signal=term peer="unconfined"
usb 1-10: USB disconnect, device number 12
usb 1-10.1: USB disconnect, device number 13
usblp0: removed
usblp1: removed
usb 1-10.2: USB disconnect, device number 14
usb 1-10.3: USB disconnect, device number 15
usb 1-10.4: USB disconnect, device number 16